T-Mobile LINKSYSRJ11 Wireless Router Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy T-Mobile LINKSYSRJ11 Wireless Router? Here is the right place to find the great deals. we can offer discounts of up to 90% on T-Mobile LINKSYSRJ11 Wireless Router. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

T-Mobile LINKSYSRJ11 Wireless Router Review

T-Mobile sent this unit to me for use with their "AtHome" service. Setup is pretty straightforward, plug in your SIM card, notify T-Mobile so they can activate it (arrange for 911 location service), plug in your RJ-11 phone and you're in business.
You get a nice landline phone with a dial-tone, clear connection, rj-11 plug for any standard kind of phone, 911 service, etc. However, there are two BIG problems.
The first is that the RJ-11 interface is a very low power one. In other words, it will only power one phone at the most -and even that phone must use very little landline power or it will cause problems where you suddenly find yourself without service. Originally I tried connecting two phones to the unit with a splitter. The ring voltage on the Linksys is not enough to power two ringing phones. As a result, if a call comes in the phones will not ring properly and cause a power loss that messes up the router, dropping it's connection to the internet and disabling your phone service until you give it a restart. Even if you have only one phone, it better not have a loud ringer or a lighted keypad or you'll have similar problems. I ended up having to shell out an extra $300 for a ring & line voltage booster (from Viking). I now have 4 phones connected without issue.
The other problem is Wifi range. My original router was a Netgear which I was very happy with. In order to use the AtHome service I have to replace my old router & Wifi with this Linksys. The Netgear used to give me 4 full bars all over my house where with the Linksys, I can only get two bars if I'm anything over 20 feet away from it. I tried connecting a better antenna which only slightly helped. Wifi output power is simply too low (and unlike other Wifi devices, the Linksys doesn't offer configuration settings to increase or decrease transmit power).
Cisco/Linksys would have saved a lot of people a lot of aggravation if they only designed the thing with a little more power from the get go.
T-Mobile's At Home service is a decent value until you add in all the time, effort and additional equipment needed to make it work properly. They require a two year commitment and I have to say at this point I'm sorry I ever signed up for it.

T-Mobile LINKSYSRJ11 Wireless Router Overview

Want to learn more information about T-Mobile LINKSYSRJ11 Wireless Router?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...

Save 77% Off: NETGEAR WG311 Wireless-G PCI Adapter Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy NETGEAR WG311 Wireless-G PCI Adapter? Here is the right place to find the great deals. we can offer discounts of up to 90% on NETGEAR WG311 Wireless-G PCI Adapter. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

NETGEAR WG311 Wireless-G PCI Adapter Review

First of all, this card is a great product and better than any of the competitors, to include Linksys and D-Link. With the deployment of SP2 you will need to change the install procedure for the V2 card so that it works without causing your system to reboot constantly. DO NOT install the utility and drivers ahead of time as the instructions in the packaging tell you to. Rather, install the card, then boot up and let windows detect the hardware. Instead of installing the drivers automatically, use the "I Will Select" the hardware option then through the hardware wizard browse to the XP Drivers folder on the disc and let windows install ONLY the driver, not the utility. XP has a very good wireless management utility and you will give up nothing by not having the Netgear utility installed. The card will finish install and you'll be up and running.

NETGEAR WG311 Wireless-G PCI Adapter Overview

The NETGEAR WG311 Wireless-G PCI Adapter makes it easy for you to provide wireless internet access to your desktop computer, letting you surf the web, check email, and chat online without the need for cables.
Easy Setup The WG311 is a PCI adapter and requires a Pentium 3 class PC with an available PCI 2.2 slot for installation. It supports Windows Vista and is also compatible with Windows XP, 2000, 98SE, and Me. Setup is as simple as inserting the adapter into a PCI slot and installing the included software. A built-in stub antenna helps you receive as strong a signal as possible for the fastest possible speeds.
Fast and Secure The NETGEAR WG311 supports the 802.11g protocol standard for speeds up to 54 Mbps and a longer range than previous-generation 802.11b adapters. With a good connection, you'll notice the difference right away as you'll be able to stream high-quality music without any hiccups and load videos much faster. Downloading files is up to five times faster than it was with 802.11b. Since 802.11g is also interoperable with 802.11b, you don't have to worry about whether or not you'll get a connection elsewhere if you move your computer around; the WG311 will automatically detect the network and allow you to connect to it at the highest speed possible.
The adapter supports 40/64-bit and 128-bit WEP encryption for security so you don't have to worry about anyone eavesdropping on your emails or stealing your passwords. The included software makes managing different WEP passwords a breeze as you can set up different profiles for each wireless network you connect to, saving yourself the trouble of having to type in encryption keys each time.
The NETGEAR WG311 Wireless-G PCI Adapter is backed by a 1-year warranty.
What's in the Box WG311 Wireless-G PCI adapter, installation guide, resource CD, warranty/support information card

Want to learn more information about NETGEAR WG311 Wireless-G PCI Adapter?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...

Cisco-Linksys WAP54G Wireless-G Access Point Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy Cisco-Linksys WAP54G Wireless-G Access Point? Here is the right place to find the great deals. we can offer discounts of up to 90% on Cisco-Linksys WAP54G Wireless-G Access Point. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

Cisco-Linksys WAP54G Wireless-G Access Point Review

I'm using the unit in a REPEATER mode. My house have 3 floors and my router (WRT54G) is located in the basement. I get a signal of 11 Mbps on the sec flr using a centrino powered notebook. The signal would drop to 1 Mbps after some use and the only way to get the signals back is to to reboot the notebook for some reason or go to the first flr. Hence, decided to get this unit and use it as a repeater.
Steps that worked for me are as follows:
01. Disable any security you have on the router (I'm using WEP) and enable SSID broadcast prior to any configuration .
02. Configure the unit using the setup disk and provided the ff:.
---- Provided a different SSID (or you can provide the same SSID) with enabled broadcast.
---- No encription
---- The same transmission channel (Chan 11) as with my router
---- New password
03. Exited program setup. Run browser and connect to the AP interface using the default address [...]
04. Configured the AP in REPEATER MODE placing my router's wireless MAC address as the repeated source signal.
05. Saved the setup.
06. Test if working by removing the wire behind the AP. On your PC/Notebook, open up a command window (START,RUN, type in "cmd" and click [OK]). Type in "ping 192.168.1.245" and press [ENTER]. You should see something like "Reply from 192.168.1.245 bytes=32 time=3ms TTL=225". If you get a "Request timed out." then that means your AP cannot be seen in your network and was not configured successfully go through STEP#1 again.
07. If successful, you need to enable security back (NOTE: At this point, the AP is running stand alone with no wires connected at the back from the router). Since I'm using WEP, connect to the AP using a browser at [...]
Go to wireless security and enable WEP and add the key codes and save your setup.
08. Now enable security back on the router with same key as you have on the AP and save your setup.
09. Test connection again by running STEP#6.
10. Place the AP where you want it to.
11. With a wireless PC/Notebook, scan for wireless networks. You should see the new SSID as well as the old one. Connect to it so that your PC/Notebook would save that information.
12. Connect to your AP, disable SSID broadcast, save setup.
13. Connect to your roter, disable SSID broadcast, save setup.
14. You're done!I placed the WAP54G on the third floor. After all is said and done, my signal was boosted to 45 Mbps (max at 54 Mbps). Works like a charm!!!
NOTE:
- These procedures is specifically if you want to configure your AP as a REPEATER.
- If you configure the AP with WEP security on the get go, you will never be able to get it to work!! I spent hours on this to no avail.
- You can use the same SSID. I used a different one because I want to see what wireless unit I am connecting to when i transfer from floor to floor.
UPDATE 031810
The unit I believe is starting to die on me. My internet access will get cut off all of a sudden and it has been happening frequently (like 4-5 times a week). I have to unplug then plug it back to make it function again. I might upgrade my system to the WRT610N and WAP610N soon.
UPDATE 033110
I decided to get a new WAP54G instead since reading through the WAP610N manual, there is no provision for a REPEATER mode. I placed the old one on the first floor. So now, I have the WRT54G on the basement, my old WAP54G on the first floor and my new WAP54G (with a NETGEAR 5 port switch connected to it) on the 3rd floor. I noticed that with the new one, my web browsing is a lot faster compared to the old one!
UPDATE 041110
So I had the NEW WAP54G for a couple of days since my last update and I still had the same problem of getting disconnected intermittently. I tried shutting down the OLD unit totally but the issue persists with the new unit so it looks like the AP is not the problem. Now, my IPOD TOUCH 32GB 3Gen needed repair and has been out of commission since last Friday 04/09 (bought this last January). And guess what? I have had no problems with my WIFI connection since then (both APs running). I have to see if the replacement Ipod screws up my wifi connection again but I do think I found out the culprit for my WIFI issues.
UPDATE 042510
I got my new replacement Ipod Touch a week ago. My WIFI failure started again but not as frequent. Now, I always turn off the Ipod's Wifi when I'm not using it. I guess I'm stuck with it.
UPDATE 072610
When I got the IOS 4 software update for the Ipod Touch, my WIFI issues disappeared. :)

Cisco-Linksys WAP54G Wireless-G Access Point Overview

The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network. Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new screaming-fast Wireless-G standard as your needs grow.
For more information on the differences between an access point and a router with access point, see the following table: To protect your data and privacy, the Wireless-G access point can encrypt all wireless transmissions. The MAC address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the Web browser-based configuration utility.
Wireless-G is the upcoming 54 Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country--but since they share the same 2.4 GHz radio band, Wireless-G devices can also work with existing 11 Mbps Wireless-B equipment.
Future-proof your wireless network with the Linksys Wireless-G access point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.
The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.


Want to learn more information about Cisco-Linksys WAP54G Wireless-G Access Point?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...

Save 26% Off: D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server? Here is the right place to find the great deals. we can offer discounts of up to 90% on D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server Review

Works fine. set up three of them on my network. 3 XP Pro computes computers and one running Win 98SE. Need to change the defauld IP addresss on each additional DP-301P+ after you use the default ip address for the first one (using the web browser to access the units ). For win 98 you have to go read the manual on the CD (a .PDF file) for installing on win 98, and ME ect..and run the included software to install the print client for the network. On win XP all you have to do is set the IP address, look at the port name in the configuration screen, and then use the win XP "install printer wizard" using the ip addrss and port name per the instructions.. I.E. the guy below who could not install it using ME apparantly did not read the Manusl on the CD for specific instructions for installing on a Win 98, or ME computer ..nor did he run the software needed to make it work on Win 98 or ME.

D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server Overview

Want to learn more information about D-Link DP-301P+ 10/100TX 1-Centronic Port Print Server?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...

Save 13% Off: Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch? Here is the right place to find the great deals. we can offer discounts of up to 90% on Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch Review

Here's my story. I used to have (note past tense) pretty much all Linksys gear in my home. Router, switches, print servers, etc. Over a half-dozen devices because our condo is wired like an office with network drops everywhere.
All of a sudden in the span of about 6 months, one-by-one most of the devices just died. They had power, but simply would not pass network traffic. I wrote to Linksys and basically said, "Here's my situation, meet me half-way, do something, anything to keep my business." They never replied. So I began a quest to look into a new switch for my home office. I decided I wanted a 16 port model because I might max out an 8 port unit.
I noticed that the "ProSafe" line from Netgear comes with a lifetime warranty and 24/7 technical support (although how much support can one need for an auto-sensing switch, assuming it's actually working.) So I gravitated toward that line of products. Then looking at the comparison charts I was trying to determine the difference between the mid-level "GS" series and their top-of-the-line "JGS" series switches.
There is only one: The JGS models have a built-in power supply. Meaning, no "brick," just a standard 3-prong power cord.
Sold!
My only complaint (and it is significant): The little fan inside this monster is quite noisy. Almost as loud a standard desktop PC, which uses a much larger power supply and fan. Mind you it does not sound "cheap." It sounds like a quality fan and power supply. It quite simply needs a little better ventilation and Netgear needs to invest that whopping extra 2 bucks on a higher grade fan that it is truly whisper quiet.
So in summary, fine for a network closet or an open area with a few people an other things that make modest constant noise, but think about it a bit if it will be in a "quiet" office setting. With quieter operation, it would easily earn 5 stars in my book.

Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch Overview

Want to learn more information about Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...

Cisco-Linksys Wireless-B Music System WMLS11B Review & Ratings

Average Reviews:

(More customer reviews)Are you looking to buy Cisco-Linksys Wireless-B Music System WMLS11B? Here is the right place to find the great deals. we can offer discounts of up to 90% on Cisco-Linksys Wireless-B Music System WMLS11B. Check out the link below:

>> Click Here to See Compare Prices and Get the Best Offers

Cisco-Linksys Wireless-B Music System WMLS11B Review

MY BACKGROUND:
I have always been an ardent musicphile and have subsequently grown a respectable collection of music. With a little less than 1000 CDs, physically finding the music you feel like listening to was always a chore (although there is much to be said for spending some quality time rediscovering that CD that you forgot you had). SO, I jumped on the MP3 bandwagon a couple of years ago, ripping my entire collection (up yours RIAA) onto my server. Having them on my server has made it easy to listen to whatever I like pretty much anywhere in the house where there's a computer (both son's rooms, living room, my office). I converted to iTunes recently when it became available for the PC (much nicer to synch the iPod with than MusicMatch ). BTW, I'm a software engineer and gadget freak, which explains why my house is wired with CAT6 cabling and why even my 3 year old son's computer is running at Gigabit speeds on our home network. :-)
Okay, enough babbling, onto the review:
WHY I BOUGHT IT-
I'd been toying with the idea of picking up one of the portable media players ever since they came out a year or so ago. I couldn't justify spending the cash on the designs that were out there until I found the Linksys WMLS11B. It is very aesthetically pleasing, but more importantly, it has a very nice (and large for the form factor) LCD screen and looks basically like a boombox that can play all your MP3s. Whenever I can (when the weather and family allow) I try to work from my deck or screened-in porch. I'm somewhat tired of having the iPod earbuds sticking in my ears and plugging a pair of powered computer speakers into the iPod is a hassle.
FIRST IMPRESSIONS-
For $180 ($250+ MSRP) I expected something a bit more substantial. It's not badly constructed, but seems too 'plasticky' and lightweight for the cost. Anyway, after about ten minutes, I had it configured and working on my wireless network (Linksys 802.11g). Incidentally, you need to set it up with an ethernet connection to set it up initially, but I could not get it to connect to any of my computers directly and had to finally just plug it into a router. The very first impression was that I had messed something up with the wiring because I had to have the volume all the way up to hear the music. After goofing around with everything, I decided that it was set up correctly, but just lacked the power to play adequately in anything else except an absolutely quiet room (with the sound level at MEDIUM, you can barely hear noise coming from the speakers).
PROS -
-Nice to look at
-Sound quality is pretty good once you hook up some nicer powered speakers
-Easy to set up
-Fairly compact
-Fair selection of internet radio stations
CONS -
-The included speakers leave a lot to be desired
-Must use MusicMatch (it sucks!!) or Rhapsody (a RealOne company, which if you didn't know, is run by Satan)
-For some reason, I can't get it to play more than ten songs from a playlist.
-The interface is HORRIBLE! Very non-intuitive and I spend more time scrolling through my collection than actually listenting to music. Most frustrating is that after you scroll down for a couple of MINUTES and find 'Modest Mouse', if you change your mind and decide you want to listen to 'Menomena' instead, the interface tosses you back to the top-most menu, meaning that you have to select 'BROWSE' then select 'ARTIST/ALBUM' then scroll down for several more minutes to get back to the M's.... Even a submenu that allowed you to scroll through the alphabet and select, say, 'M' and then browse all the M's would be VERY nice. If the playlist function worked properly, then you could invest some time and set up your favorite songs and/or artists, but for spontaneously searching through your catalog... uhh, you won't.
-For some reason, I occasionally lose signal with my network and it can't find the server (even though I have my laptop receiving 54Mbps with excellent signal strength right next to it). Not a frequent occurence, just puzzling.
-Being 802.11b based, it only supports WEP and not WPA.:-(
-No carry handle
-The remote is pretty good, but doesn't work unless pointed directly at the unit and from within a very shallow angle from center.
-No headphone jack on the front
-Too many cables sticking out of the back. Cable management is so easy, yet apparently an alien concept to most manufacturers.
CONCLUSIONS:
It's just frustrating to have something soooo close to being good, but having some poor design muck it up. I really wish they'd assign it a more iPod-like interface (where you can use the back button to go to your previous menu level and selection). I also wish they'd find some way to tap into iTunes as a server or roll their own (okay, I can dream). I believe that if Linksys were to revamp the interface firmware and take care of some of the problems with the 'music server', it would be worthwhile. Unfortunately, I've dealt with Linksys for too long to even hope that they'd bother to update this version. They will instead release a newer, improved version which will make this model the MP3 Edsel.
I'm going to return this to the store today as I have a 10 day 'remorse period' that expires on Monday.
Nice try Linksys, better luck next time. :-(

Cisco-Linksys Wireless-B Music System WMLS11B Overview

The Linksys Wireless-B Music System lets you bring the digital music stored on your computer to your Home Entertainment Center, without running cables through the house.Using a wireless connection, the Music System finally frees your digital music collection from those little computer speakers to play in full glory through your stereo system.|||The Wireless-B Music System sits by your home stereo and connects to it using standard consumer electronics cables.Then it connects to your home network by Wireless-B (802.11b) wireless networking, or if you prefer, it can be connected via standard 10/100 Ethernet cabling.Using the included remote control and the built-in LCD menus, you can browse your MP3 or WMA formatted music collection on your home PCs by title, artist, album, genre, or playlist.

Want to learn more information about Cisco-Linksys Wireless-B Music System WMLS11B?

>> Click Here to See All Customer Reviews & Ratings Now

Read More...